Professional Audio Processor

DPA Series Professional 2 In - 4 Out Audio Processor
DPA240A is a High End 2-IN/4-OUT digital speaker management system which maintains the same high quality hardware present in former QRT versions. Designed for maximum versatility, it provides all the processing and control necessary for both live and fixed installation use. Proving for any crossover configuration, it offers 2 analog inputs, 4 analog outputs, managed by a powerful MARANI®  DSP Engine, for a full 96kHz processing, in addition to high performance 24 bit AD/DA Converters. Each input channel provides a choice of EQ with 30-band Parametric EQ, 3 ALL PASS Filter, Gain control, Noise Gate, RMS Compressor, Internal White/ Pink Noise Generator, and configurable Delay.Each output offers up to 7-band of parametric equalization, in addition to the crossover filters which themselves provide slopes from 6dB/Octave up to 48dB/Octave. Each output path also features Peak Limiter and configurable Delay.

The DPA240A supports a full matrix mixing mode where inputs may be routed/mixed in any ratio to any output. For remote configuration and control the DPA240A can be connected via USB or RS485 connections. The control remote PC software allows simultaneous control up to 32 units, setting all parameters and showing real time levels.

DPA2448QRT: it is a special version of DPA240A, where the remote control can be selected between the USB connection on the front panel or the TCP/IP one, located on the rear panel, replacing the RS485.
Marani and the Marani logo are registered trademarks of Seed Asia LTD. Copyright © 2014 Seed Asia, All rights reserved.