The USB-485-RJ cable is a USB to RS485 levels serial UART converter cable incorporating FTDI’s chip USB to serial UART interface IC device which handles all the USB signalling and protocols.
The cable provides a fast, simple way to connect devices with a RS485 interface to USB and in addition, it is USB powered and USB 2.0 full speed compatible and supports a data transfer rate up to 3 Mbaud.
The USB-485-RJ cable contains a small internal electronic circuit board, including the RS485 transceiver. The other end of the cable is equipped with RJ45 connector in order to communicate with Marani amplifier modules.
USB-RS485 converter cable provides a USB to RS485 serial interface with RJ45 end connector.
Suitable for the following products:
MDA44T, MDA44F, MDA88T
Audio Management Systems
Entire USB protocol handled by the electronics in the cable.
EIA/TIA-485 communication interface with low power requirements.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
Data transfer rates from 300 baud to 3M baud
Low USB bandwidth consumption
USB 2.0 Full Speed compatible.
-40°C to +85°C operating temperature range
Cable length: approx. 1.60m (5.25 feet)
FCC and CE compliant
Drivers for: Windows 8 and 8 (64bit), Windows 7 and 7 (64bit), Windows Vista and Vista (64bit), Windows XP and XP (64bit)