Outstanding Performance | Excellent sonic performance with 24bit high end converters coupled with 48kHz sample rate High power output: 2x140W @ 4ohms; or 1x280W for the 70V/100V Direct DriveSwitched-Mode Power Supply with auto voltage sensing Class D Amp Module - full bandwith PWM modulator with ultra low distortion Full protection circuitry including Over-Current, Over/Under-Voltage, Output DC and Over-Temperature Supports DanteTM , Bluetooth with aptXTM , Ethernet up to user's preference |
Top-grade DSP Engine | 5 band PEQ on input channel 7 band PEQ on output channel Each band can be switched to Bell, Lo/Hi-Shelving variable Q HP/LP filters with slopes from 6dB/Octave up to 24dB/ Octave including Butterworth, Bessel, Linkwitz-Riley Input channel includes Noise Gate, RMS compressors, while output channels features a precision Peak Limiter with selectable Attack/Release time and Threshold.Adjustable Delay time up to 164.998 ms for output |
Network Connection & Control | USB or Wifi connection for system setup, monitoring and control via manageable remote PC software Simultaneous control up to 32 units via PC software 3 Preset Selection |
Power & Amplifier Sections | |
Number of Channels | 2 |
Max Output Power | 2x140W @ 4ohms; or 1x280W for the 70V/100V Direct Drive |
Output Circuitry | Class D - full bandwith PWM modulator with ultra low distortion |
THD+N | <0.003% |
Signal To Noise Ratio | >105 dB (A-weighted, 20 Hz - 20 kHz, 8Ω load) |
Frequency Response | 20 Hz - 20 kHz ± 0,15 dB (8Ω load, 1 dB below rated power) |
Power Supply | Integrated power supply and auto voltage sensing |
Operating Range | Universal Mains, 110-240 V |
Consumption/Current draw and Thermal dissipation @230V | 8.8 W / 0.086 A/ 30BTU/H (Idle) 54.7 W/ 0.277 A/ 187 BTU/H (I/8 max. power@4ohm) 331 W / 1.54 A/ 1130 BTU/H (Full power) |
Protections | Over-Current, Over/Under Voltage, Output DC and Over-Temperature |
Maximum Input/Output Level | +12 dB |
Audio | |
Analog Input | 2 x electronically balanced, +12dB |
Analog Output | 2 x electronically balanced,+12dB |
AD & DA Converters | 24bit |
DSP & Processing | |
DSP Engine | MARANI® DSP |
DSP Resolution | 24bit (data) x 24 bit (coeff.), 54 bit accumulation registers |
96 bit precision on intermediate processing data | |
Input & Output Gain | -60 ~ +12 dB |
Parametric Equalization | 5 filters per input channel; 7 filters per output channel |
Filter Type | Bell, Hi/Lo-Shelving, HP/LP, Notch Filter |
Filter Gain | From -15dBu up to +15dBu by 0.5dBu resolution steps |
Center Frequency | Selectable with a 1Hz resolution step from 20Hz up to 20kHz |
HPF/LPF Filter | HPF/LPF up to 48dB/Oct, selected as Butterworth, Bessel, Linkwitz Riley |
Input Noise Gate | threshold: -80 ~ -50dBu; Release time: 1~1000ms; Attack time:30~1000ms |
Input Noise Generator | White/Pink Noise; Level: -40dBu ~ 0dBu |
Input RMS Compressor | Threshold from -18dBu up to +12dBu; Attack time from 5ms up to 200ms; |
Knee 0~100%; Ratio from 2:1 to 32:1;Release time from 0.1s up to 3s, with Make up -/+12dB | |
Output Peak Limiter | Threshold from -18dBu up to +12dBu Release time 0.1 ~ 5ms; Attack time 1ms ~ 900ms; |
Delay | -up to 164.998ms on output Channel |
General | |
Dimensions | 220x260x44(mm) |
Weight, Net / Shipping | 4.41 lbs (2.0 Kg) / 5.51 lb (2.5 Kg) |