PDA Series

3-Channel Power Amplifier(3X500W@4Ω)
PDA530P is a complete solution dedicated to 2-way or 3-way self-powered loudspeakers. Designed to meet different applications, it provides 3 channels with output power of 3x500W@4 Ohm. Morever the 2 channels can be bridged into a powerful single 1x1000W@@8Ohm channel in order to drive i.e. Subwoofers or Multiple Ways Cabinets with Passive Xovers. In addition it offers a full set of added value features such as on board DSP and RS485 connection for monitoring and control via dedicated PC software.

To guarantee maximum reliability, the PDA530P includes a highly efficient universal switch mode power supply with PFC (Power Factor Correction) which provides a total 1kW power to the 3 output channels. The 3 output stages use the well-known Class D module. The PDA530P  includes a set of sophisticated processes for loudspeaker,implemented by the powerful MARANI® DSP running 96kHz/24bit [96 bits precision for the internal intermediate processes] and high performance 24bit AD/DA Converters. Processes as Noise Gate, crossover filters, parametric EQs per input and output sections,RMS compressor, alignment delay, all in all everything needed to optimize a self-powered loudspeaker. Morever the efficient heat dissipation system and Over-Heat protection ensure uncompromised reliability. Furthermore the PDA530P is also equipped with a Dynamic Loudness function and an useful Pink/White noise generator. All setup parameters for input mixing, DSP features and the limiter setting are accessible by using the remote PC software.High Band can be splited or not in two sub-band. When the Xover split freq is enabled then the RMS compressor working on the lower band and a additional volume (hi_level) working on the Higher band.
Marani and the Marani logo are registered trademarks of Seed Asia LTD. Copyright © 2014 Seed Asia, All rights reserved.